JCTI Ultrasonic Level Meter
JCTB Ultrasonic Level Meter a compact 2-wire series ultrasonic level meter for continuous non-contact level measurement in liquids and solids. It consists of probe and electronic units, both of which are leak-proof structure. This series can be widely applied to the metallurgical, chemical, electricity and oil industries.
- Introduction
- Parameters
- Model
- How to Order
- Video
CTI Ultrasonic Level Meter
JCTI Ultrasonic level meter is an compact 2-wire series ultrasonic level meter for continuous non-contact level measurement in liquids and solids. It consists of probe and electronic units, both of which are leak-proof structure. This series can be widely applied to the metallurgical, chemical, electricity and oil
Feature
Continuous non-contact level measurement with compact version;
Integrated design, installed conveniently;
Protected in the excessive voltage and current, protected in the thunder and lightning;
The big show window of LCD is easy to debug and observe;
Excellent anti-interference capability;
4-20mA output;
Intellectual signal treatment technology, guarantee that the instrument meets various kinds of operating occasion;
All plastic outer cover ( IP67 ), airproof and alkali-resisting, meet the abominable environment.
Working Princinple
JCTI Ultrasonic Level Meter
Range： JCT4I：4m
JCT8I：8m
Blocking distance ：JCT4I：0.20m（PVC -probe） 0.30m（PTFE-probe）
JCT8I：0.30m（PVC-probe） 0.40m（PTFE-probe）
Accuracy ： 0.2% of span in air (with standard signal strength )
Resolution ： 1mm
Display type ： 4 segment LCD
Signal output ： 4~20mA
Output load ： 0~600Ω ( See the load with the supply curve on next page )
Output resolution ratio ： 0.03% of the actual range
Parameter set up： 3 induction buttons
Temperature range: -40ºC~ 70ºC
Temperature compensation ： automatic in the whole range
Pressure range ： ±0.2MP
Power supply ： DC24V（ allowed power range : DC21v~DC27v），35mA
Signal wire diameter ； F6~F12mm
Single wire diameter ： F0.5~F1.78mm
Cable fix ： PG13.5 gland
Beam angle ： 8º (3db)
Measure cycle ： 1.0～2.0 seconds
Crust material ：Electrical unit ：Cast aluminum, surface spray
probe（transmitter）： PVC / PTFE
probe of the intrinsically safe explosion-proof instrument ：
the common type ：PVC，with aluminum tube
the anticorrosive type ： PTFE ，with stainless steel tube
Enclosure rating ： IP67
Mounting mode ： thread 、flange
Butt joint flange dimension （Airtight container）：
min inner diameter: 65mm， max length: 500mm.
Model Selection
| Model | |
| T | 2 wire series , compact version |
| N | 3 wire series , compact version |
| R | Rs485 series , compact version |
| U | 4 wire series , compact version |
| TI | ExiallCT6 2 wire series , intrinsically safe explosion-proof , Exia IICT6 |
| F | Standard series , remote type |
| M | Multi-function , remote version |
| Range | |
| 04 | 0-4M |
| 06 | 0-6M |
| 08 | 0-8M |
| 10 | 0-10M |
| 12 | 0-12M |
| 15 | 0-15M |
| 20 | 0-20M |
| 30 | 0-30M |
| 40 | 0-40M |
| Housing material | |
| P | Plastic |
| G | Aluminum , green |
| B | Aluminum , blue |
| K | Aluminum, blue & gray |
| V | Aluminum , white |
| Wet-part material | |
| S | ABS& PVC |
| F | PTFE |
| Q | Other |
| Process connection | |
| 1 | G 1/2” thread |
| 2 | G2 thread |
| 3 | DN50 flange |
| 4 | DN80 flange |
| 5 | DN100 flange |
| 6 | DN150 flange |
| 7 | DN200 flange |
| 8 | |
| Output | |
| C0 | 4-20ma |
| C1 | Rs485-Hilevel |
| C2 | Rs485-Modbus |
| C3 | Rs 485-Profibus |
| Switch output | |
| 2 | 2 relay , SPDT |
| 4 | 4 relays , SPDT |
| 6 | 6 realys , SPDT |
| Power supply | |
| D | DC24 V |
| A | AC 220 V |
How to order for JCTI Ultrasonic Level Meter
- Medium
- Range
- Process connection
- Output
- Power supply
- Other special requirement
JCTI Ultrasonic Level Meter
