JC011 Micro Size Thermal Mass Gas Flow Controller
JC011 Small Size Thermal Mass Gas Flow Controller is designed on the basis of thermal dispersion and adopts the method of constant differential temperature to measuring gas flow. It has advantages of small size, easy installation, high reliability, and high accuracy, etc.
- Introduction
- Feature
- Parameter
- How to Order
- Video
JC011 Micro Size Thermal Mass Gas Flow Controller
Thermal gas mass flow controller is designed on the basis of thermal dispersion and adopts the method of constant differential temperature to measuring gas flow. It has advantages of small size, easy installation, high reliability, and high accuracy, etc.
The meter contains two platinum resistance temperature sensors. The thermal principle operates by monitoring the cooling effect of a gas stream as it passes over a heated sensor. Gas flowing through the sensing section passes over two sensors one of which is used conventionally as a temperature sensor, whilst the other is used as a heater. The temperature sensor monitors the actual process values whilst the heater is maintained at a constant differential temperature above this by varying the power consumed by the sensor. The greater the gas velocity, the greater the cooling effect and power required to maintain the differential temperature. The measured heater power is therefore a measure of the gas mass flow rate.
Feature for JC010 Small Size Thermal Mass Gas Flowmeter
Measuring the mass flow or volume flow of gas
Do not need to do temperature and pressure compensation in principle with accurate measurement and easy operation.
Wide range: 0.5Nm/s～100Nm/s for gas. The meter also can be used for gas leak detection
Good vibration resistance and long service life. No moving parts and pressure sensor in transducer, no vibration influence on the measurement accuracy.
Easy installation and maintenance. If the conditions on site are permissible, the meter can achieve a hot-tapped installation and maintenance. (Special order of custom-made)
Digital design, high accuracy and stability
Configuring with RS485 or HART interface to realize factory automation and integration
Technical Parameter for JC010 Small Size Thermal Mass Gas Flowmeter
| Description | Specifications |
| Measuring Medium | Various gases (except the acetylene ) |
| Pipe size | DN3 to DN10 |
| Velocity | 0.1 to 100Nm/s |
| Accuracy | ±1 to 2.5 % |
| Working temperature | Sensor :-40 to 220 °C Transmitter :-20 to 45 °C |
| Working pressure | Insertion sensor : medium pressure ≤1.6Mpa Flange sensor :medium pressure ≤1.6Mpa Special pressure confirm us |
| Power supply | 24 VDC |
| Response time | 1 S |
| Output | 4-20ma ( Optoelectronix isolation , maximum load 500 ,pulse , RS 485 |
| Alarm Output | 2 line relay , normally open state , 3A/30VDC |
| Sensor type | Standard insertion , hot-tapped insertion and flanged |
| Construction | Compact and remote |
| Pipe Material | Carbon steel , stainless steel , plastic , etc |
| Display | 4 lines LCD Mass flow , volume flow in standard condition , flow totalizer , velocity |
| Protection Class | IP 65 |
| Sensor Housing Material | Stainless steel 316 |
How to order
- Pipe size
- Medium
- Flow rate
- Power supply
- Working pressure and temperature
- Process connection
JC010 Small Size Thermal Mass Gas Flowmeter
