JC808 Solid 26 G Radar Level Transmitter
JC 808 radar lever meter is suitable for non-contact continuous measurement of these things’ level, such as liquid, slurry and gunk.
- Package: Exported Wooden case or according to customer request
- Delivery Time: 7 to 10 working days
- Transports: By sea, by air, by high express
- Shipment Port: Shanghai Port
- Origin of Place: Jiangsu
- Warranty: 12 Months
JC 808 radar lever meter is suitable for non-contact continuous measurement of these things’ level such as liquid, slurry and gunk, and also is used in the places where temperature and pressure have big change, inert gases and volatilization exist.
- Introduction
- Parameters
- Model
- How to Order
- Video
JC808 Solid 26 G Radar Level Transmitter
JC808 Solid 26 G Radar Level Transmitter is for strong dew , dust , crystal ,its range can reach 70 M . There is a certain existing beam angle while the antenna
transmitting microwave pulse . There should beno barries between the lower edge of antenna and surface of measured medium . Therefore it is highly recommended to avoid facilites inside vessels , such asladders , limit switches , heating spirals , struts and etc , during the mounting process .
Technial Parameter for JC808 Solid 26 G Radar Level Transmitter
| Frequency of operation | 26GHz |
| Measurement range | 0…10 m |
| Repeatability | ±3mm |
| Resolution ratio | 1mm |
| Sampling | echo sampling 55 /s |
| Response speed | >0.2s(according to the specific condition)
|
| Current signa | 4…20mA
|
| Precision | <0.1% |
| Antenna material | Antenna material |
| Communication interface | HART |
| Process connection | G1-1/2 316L PTFE |
| Enviroment Condition | －40℃…＋80℃ |
| Anti-explosion authentication | ExiaII C T6 |
| Protection | IP68 |
Technical Parameter for JC808 Solid 26 G Radar Level Transmitter
| Explosion Proof Approval | |
| P | Standard (without approval |
| I | Intrinsically safe (Exia IICT6) |
| C | Intrinsically safe (EXia IICT 6) |
| G | Intrinsically safe+flameproof Approval (Exd ia II CT 6) |
| Shape of Antenna /Material /Process temperature | |
| B | Horn 48mm stainless steel 316L |
| C | Horn 78mm /stainless steel 316LSS |
| H | Horn 98mm/Stainless steel 316LSS |
| I | Horn 98mm(lengthen) 316LSS |
| J | Horn 123mm/Stainless steel 316LSS |
| K | Horn 98mm/PP/PTFE shield |
| L | Horn 98mm(lengthen)/PP/PTFE shield |
| M | Horn 98mm/stainless steel 316L/PTFE shield |
| N | Horn 98mm(lengthen) /stainless steel 316L/PTFE shield |
| P | Horn 123mm/stainless steel 316L/PTFE shield |
| X | Special Design |
| Process Connection /Material | |
| GP (H) thread | (F) Thread G11/2A stainless steel |
| GA(H)thread | (H)Thread 11/2NPT stainless steel |
| GB(G)thread | (G) Thread G11/2A /PP |
| GC(J)thread | G11/2A/Stainless steel 316L/temperature (-60 to 250 °C) |
| GD(K) thread | G11/2A/Stainless steel 316L/temperature (-60 to 400 °C),pressure 40Mpa |
| GE(I) thread | G11/2A /stainless steel 316L(huff) |
| GX | Special Design |
| Flange /Material | |
| F0 | NO |
| FX | Special design |
| Seal /Process temperature | |
| 2 | Viton(-60 to 150) °C |
| 3 | Kalrez(-60 to 250 ）°C |
| 4 | Graphite (-60 to 400 )°C |
| Electronic | |
| B | (4-20)mA/Hart 2 wire |
| C | (4-20)mA(22.8-26.4)V DC /Hart 2 wire/4 wire |
| D | (198-242) VAC/Hart 4 wire |
| Housing /Protection | |
| A | Aluminium/IP67 |
| B | Plastic/IP66 |
| D | Aluminium (2 chamber)/IP67 |
| G | Stainless steel 316L/IP 67 |
| Cable Entry | |
| M | M20*1.5 |
| N | 1/2”NPT |
| Display /Programming | |
| A | Yes |
| X | NO |
How to order for JC808 26G Non-contact Radar Level Transmitter
1. Medium
2. Range
3. Working temperature
4. Working pressure
5. Process connection
6. Other requirement
JC808 Solid 26 G Radar Level Transmitter
