JC090 Compact Type Pipe Electromagnetic Flowmeter
- Price Term: FOB/CIF/EXW/DAP
- Package: Exported Wooden case or according to customer request
- Delivery Time: 7 to 10 working days
- Transports: By sea, by air, by high express
- Shipment Port: Shanghai Port
- Origin of Place: Jiangsu
- Warranty: 12 Months
Electromagnetic Flowmeter Calibration
- Twice calibration within 24 hours
- Two automation calibration system
- Standard meter with 0.025% accuracy
- Tracking Calibration Report
- Min size 6mm to max size 2600mm
- Standard Accuracy 1%, best accuracy 0.5%
Electromagnetic Flowmeter Feature
- Simple structures, firm, no movable parts, and long operation life
- No intercepting fluid parts, no pressure loss, and fluid clogging
- No mechanical inertia, quick response, and good stability apply in the automatic examination, adjustment, and control
- Measuring accuracy is not influenced by physical parameters such as style, temperature, viscosity, density, and pressure.
- Employ Teflon or rubber liner and different combinations of an electrode material such as Hastelloy C, Hastelloy B, 316L,
- Titanium and adapt to the need of different mediums.
- Supply many styles of flowmeters such as inline type and insertion type, etc.
- Adopt EEPROM memory to measure operation data, safe and reliable protection of memory.
- Integral type flowmeters and remote type flowmeters.
- LCD backlight display with high clearness
JC090 Compact Type Pipe Electromagnetic Flowmeter
Introduction
An electromagnetic flowmeter is a kind of inductional instrument designed by Faraday’s law of electromagnetic induction to measure the flow of conductive media in the tube. It adopts the technology of insertion of a single chip to realize digital excitation and employs CAN local Fieldbus.
The electromagnetic flowmeter can realize local indication and output electrical current signal of 4-20mA which can be used to record, adjust and control. Electromagnetic flow meters are widely used in industrial sectors such as the chemical industry, environmental protection, metallurgy, pharmaceutical, paper making, water supply, and removal, etc.
Besides measuring the flow of general conductive liquid electromagnetic flowmeter can measure the flow of liquid-solid mixed fluid, high-viscosity fluid and salt, strong acid, and strong alkali.
Smart electromagnetic flow meters consist of sensors and smart signal transducers. And it can be classified into two structures— integral type and remote type according to the set-up form of the sensor and transducer. In terms of integral type electromagnetic flow meters, transducer and sensor directly assemble as a whole and can not be dissociated. It is usually used at the scene where the environmental situation is good. To remote type electromagnetic flow meters transducer composes a product through a special electric cable and sensor. The sensor is installed at the scene and the transducer is installed in the place where the conditions are good. It is usually used at the scene where the environmental situation is poor, such as underground wells, high temperature, and the place where people can not reach.
Technical Parameter
| Suitable Diameter | DN10~DN2600 (below DN25 non-standard, which should be customized) |
| Electrodes Materials | 316L (stainless steel), Hastelloy C, Hastelloy B, Titanium, Tantalum |
| Suitable Fluid | Liquid with a conductive ratio of more than 5 μs/cm |
| Measuring Range | 0.1~10m/s (extendable to 15m/s) |
| Upper Limit of Span | 0.5~10m/s. 1~5m/s recommended |
| Accuracy | 0.3%, 0.5%,1.0% |
| Output Signals | 4~20mADC, load<= 750ohm, 0~3kHz, 5V with source and changeable width. high terminal and effective frequency output , RS485 interface |
| Operation Pressure | 1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special) |
| Fluid Temperature | -20C~80C, 80C~130C,130C~180C Depending on Lining Material |
| Ambient Temperature | Sensor -40C~80C. transducer -15C~50C |
| Ambient Humidity | <= 85%RH (at 20C) |
| Cable Outlet Size | M20(16) ×1.5,1/2”NPT |
| Power Supply | 220VAC±10%, 50Hz±1Hz, 24VDC±10% |
| Power Consumption | <=8W |
| Protection Ratings | Integral type: IP65. remote type: sensor IP68, transducer IP65 |
| Materials of Liner | PTFE, soft rubber, hard rubber, PFA, etc |
| Process Connection | Flange: ANSI, DIN, JIS, ISO, GB standard Thread :NPT ,BSP ,G Tri-clamp connection |
| Earthing Materials | 316L (stainless steel), HC, Ti, Ta, Cu |
| Housing Material | Carbon steel, 304SS, 316SS |
Model Selection
| Code | Nominal Diameter (mm) | Flow Range (m3/h) | Code | Nominal Diameter (mm) | Flow Range (m3/h) | |||||
| JC-090-10 JC-090-15 JC-090-20 JC-090-25 JC-090-32 JC-090-40 JC-090-50 JC-090-65 JC-090-80 JC-090-100 JC-090-125 JC-090-150 JC-090-200 JC-090-250 JC-090-300 JC-090-350 JC-090-400 | Dn10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 DN350 DN400 | 0.085-2.8 0.19~6.36 0.34~11.3 0.53~17.66 0.87~28.94 1.36~45.22 2.12~70.65 3.58~119.40 5.43~180.86 8.48~282.6 13.25~441.56 19.08~635.85 33.91~1130.40 52.99~1766.25 76.30~2543.40 103.86~3461.85 135.65~4521.60 | JC-090-450 JC-090-500 JC-090-600 JC-090-700 JC-090-800 JC-090-900 JC-090-1000 JC-090-1200 JC-090-1400 JC-090-1600 JC-090-1800 JC-090-2000 JC-090-2200 JC-090-2400 JC-090-2600 | DN-450 DN-500 DN-600 DN-700 DN-800 DN-900 DN-1000 DN-1200 DN-1400 DN-1600 DN-1800 DN-2000 DN-2200 DN-2400 DN-2600 | 171.00~5722.65 211.95~7065.00 305.21~10173.00 415.42~13847.40 542.59~18086.40 686.72~22890.60 847.80~28260.00 1220.83~40694.40 1661.69~55389.60 2170.37~72345.60 2746.87.00~91562.40 3391.20~113040.00 4103.35~136778.40 4883.33~162777.60 5731.13~191037.60 | |||||
| Code | Electrode Material | |||||||||
| K1 K2 K3 K4 K5 K6 K7 | SS 316L Hastelloy B Hastelloy C Titanium Tantalum Pt/Iridium Alloy Stainless Steel Painting Tungsten Carbide | |||||||||
| Code | Material of liner | |||||||||
| C1 C2 C3 C4 C5 C6 C7 | PTFE (F4 or Teflon) Fluorinated Ethylene Propylene (FEP) Fs PO (Soft Rubber) Polyurethane Rubber (PUR) Hard Rubber PFA | |||||||||
| Code | Function | |||||||||
| E1 E2 E3 F1 F2 F3 F4 T1 T2 T3 P1 P2 P3 P4 P0 D1 D2 D3 J1 J2 J3 W1 W2 W3 | Class 0.3% Class 0.5% Class 1.0% 4~20mADC, load ≤750Ω 0~3kHz, 5V active, changeable pulse, high-terminal and effective frequency output RS 485 interface (Modbus) HART Normal Temperature High Temperature Ultra Temperature 1.0MPa 1.6MPa 4.0MPa 16MPa Special Pressure 220VAC+10%; 50Hz+ 1Hz 24VDC+10% Battery Operated Integral Type Remote Type Explosion-proof, Integral Flange connection (standard :ANSI,JIS ,DIN,GB) Thread connection (NPT ,BSP ,G) Sanitary Tri-clamp connection | |||||||||
Related Inserted Electromagnetic Flowmeter
Instruthinksupply a complete solution for electromagnetic flowmeter, not only compact type electromagnetic flowmeter, but also inserted electromagnetic flowmeter.
