JC200 Thermal Flow Switch /Sensor
JC200 Thermal Flow Switch is based on two temperature sensors that are positioned within the medium. The unheated sensor registers the liquid temperature.
- Price Term: FOB/CIF/EXW/DAP
- Package: Exported Wooden case or according to customer request
- Delivery Time: 7 to 10 working days
- Transports: By sea, by air, by high express
- Shipment Port: Shanghai Port
- Origin of Place: Jiangsu
- Warranty: 12 Months
JC200 Thermal Flow Switch, the other sensor is heated a few degrees above the medium, when the medium flows, the heat generated in the sensor is conducted away by the medium. The temperature of the sensor is measured and compared to the temperature of the medium. The state of flow can be derived by the temperature difference.
- Features
- Specification
- Wiring
- Dimension
- Mounting
- Ordering
- Accessory
- No moving parts – no maintenance is nee
- One single model is good for multiple pipe size
- Compact design
- Low–pressure loss
- LED displays flow trend and switching state
| Measuring range: | 1…150cm/s(Water), 3…300cm/s(Oil) |
| 20…2000cm/s(Air) | |
| Output: | PNP, NPN, Relay, Analog (4…20mA) |
| PNP + NPN (SPDT) | |
| Power supply: | 24V±20%DC |
| Operating current:: | Max. 400 mA(PNP / NPN) |
| Max. 1A@48V ac/dc(Relay) | |
| No-load current: | Max. 80mA |
| Display: | 6-LEDs |
| Calibrating: | Potentiometer |
| Pressure rating: | 100bar |
| Temperature gradient: | ≤4℃/s |
| Response time: | 1–13s, Typically 2s |
| Initialization time: | 8s |
| Wiring protection: | Reverse polarity, Overvoltage and Short-circuit |
| Protection class: | IP67 |
| Medium temp.: | -20–80℃ |
| Ambient temp.: | -20–80℃ |
| Storage temp.: | -20–100℃ |
| Electrical connection: | M12 plug |
| Materials: | Sensor: stainless steel |
| Housing: stainless steel | |
| Weight: | 0.4kg |
| FT11N | – | G12 | H | D | P | P | Q | Description |
| JC200 | – | Model# Electronic flow switch (sensor) | ||||||
| G12 | Thread G1/2 | |||||||
| G14 | Thread G1/4 | |||||||
| N12 | Thread NPT1/2 | |||||||
| H | Male thread | |||||||
| D | DC 24V±20% power supply | |||||||
| P | PNP output | |||||||
| N | NPN output | |||||||
| C | Relay output | |||||||
| A | 4…20mA output | |||||||
| R | PNP + NPN output (SPDT) | |||||||
| – | 4…20mA output | |||||||
| Q | M12 plug |
| ST04- | PU | 02 | F | G | Description |
| ET04- | M12 Cable outlet | ||||
| ST04- | M12 self locking screw plug | ||||
| PU | Material: PUR | ||||
| 02 | Length: 2M | ||||
| 05 | Length: 5M | ||||
| 10 | Length: 10M | ||||
| F | Female plug | ||||
| G | Straight plug | ||||
| W | Right angle plug |
Note: Model with relay output needs 5-pin plug – change S(E)T04 to S(E)T05 when ordering.
Get Our Best Quotation
