JC-1100 Single-Circuit Digital Display PID Controller
JC-1100 (simple) single-circuit digital display controller provides easy operation with a measurement precision of 0.3%; 7 types of dimensions available; double four-digit LED display, supporting thermocouple, thermal resistance, voltage (extraction operation available), current (extraction operation available), and transducer input; applicable to the measurement of industrial process quantifiers including temperature, pressure, flow, liquid level, and humidity, etc. Supporting 2-way alarm, 1-way control output or RS485 communication interface adopting standard MODBUS protocol, 1-way DC24V feed output; photoelectric isolation between input, output, and power end; 100-240V AC/DC or 20-29V DC switch power supply; standard snap-in installation; operating temperature: 0-50℃, relative humidity: 5-85% RH without coagulation.
JC-1100 (simple) single-circuit digital display controller
The PID controller stabilizes the gain but produces a constant steady-state error, the I-controller eliminates steady-state error, while controller D minimizes the rate of change of the error.
- It overcomes the deficiencies of other control types.
- PID controller operation does not require much experience.
- Process independent.
- Maintenance-friendly.
- It can provide precise control of the set point.
Single-circuit Digital Display Controller
JC 1100 series of simple single-loop display controllers have a modular structure, are simple, easy to operate, and cost-effective, and are suitable for use in the plastics, food, and packaging machinery industries.
It can collect, display, control, transmit, communicate and print various signals, such as temperature, pressure, liquid, level, speed, etc, to form a digital collection system and control system.
It is widely used in electric power, petrochemical, metallurgy, light industry, pharmaceutical , aviation, and many other fields.
JC-1100 Single-Circuit Digital Display PID Controller
Profile of Display Panel
(1) PV Display (measured value)
(2) SV Display
Display parameters like input type in measurement mode;
Display setting value in parameters setting mode;
(3) Primary alarm (AL1) and secondary alarm indication lamp, running lamp (RUN) and output lamp (OUT);
(4) Confirmation (5) Shift (6) Decrease (7) Increase
